this has been bugging me for weeks. so i get this jello wobble thing in my clips but its totally random, like some flights are perfectly smooth and then ill go out the next day in similar conditions and get this rolling shutter mess through the whole clip. im using the same ND filters i always have and the gimbal looks fine when i check it before takeoff. not sure if its a wind thing or if somethings actually wrong with the gimbal itself.

i did drop it a few months ago but it seemed fine after and ive had plenty of good flights since then. running latest firmware too. anyone dealt with something like this or have any idea what to even check

jello on the Air 2S usually comes down to either the gimbal dampeners being worn or slightly off after a knock, or the ND filter not being seated properly and vibrating. even a tiny bit of wobble in the filter can cause that. try flying without filters once just to rule that out. also worth doing a gimbal calibration in the app if you havent lately, sometimes after a drop things can drift a little even if it looks okay visually

had something similar a while back and it turned out to be one of my props was ever so slightly warped, like you couldnt even see it by eye but it was causing just enough vibration at certain RPM ranges to mess with the gimbal. started happening intermittently exactly like you're describing. swapped all four props out and it basically went away. props are cheap so worth just trying a fresh set before you go down the gimbal rabbit hole