Just updated my Mini 3 Pro to the latest firmware and now it won't connect to the RC-N1 controller at all. The drone powers on fine and the controller is charged, but they're not pairing. I've tried restarting both devices multiple times.

Has anyone else experienced this issue? I'm supposed to shoot a wedding tomorrow and I'm starting to panic!

I had this exact same issue last month! Try this sequence: power off both devices, turn on controller first, then drone. Also check if you have a USB cable problem - swap to a different cable. Firmware mismatches are usually the culprit.

This happened to me too after an update. Go into the DJI Fly app settings and check if your controller firmware also updated properly. Sometimes only the drone updates and the controller gets left behind.

Ugh, DJI updates are so hit or miss. If nothing else works, try connecting through DJI Assistant 2 on your computer and doing a manual firmware rollback. It's a pain but it saved my drone once.